Professional clearing saw for mowing tough areas of grass and brush
For working in challenging areas of tough grass. Large cutting diameter and optimised gear ratio. Improved mowing performance. Technically enhanced gearbox includes updates to the sealing system, main bearing and lubricant circulation - meaning increased robustness and a long service life. New deflector design makes storage easier and increases visibility of the cutting attachment whilst working. Reduced vibration levels during partial load operation. STIHL 4-point anti- vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, STIHL 2-MIX engine, STIHL M-Tronic. With ADVANCE Universal harness and AutoCut 46-2 mowing head.
Features
STIHL M-TRONIC
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. M-Tronic also remembers the settings from the last time the tool was used.
STIHL ErgoStart (FT)
STIHL ErgoStart cuts the effort required to start the tool by half. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology
2-stroke engine with stratified charge. This results in more power with up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Bike handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
STIHL 4-point anti-vibration system
In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter.
ADVANCE universal harness, orange
Extremely ergonomic, comfortable and light. For strength saving, mowing and shredding. Chest belt and tool bag also available.
Tool free handle adjustment
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.
Compensator
Prevents the fuel-air mixture getting richer as the air filter becomes clogged. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically.
Start flap lever (M-Tronic)
With M-Tronic there is only one starting position on the start flap lever. The system detects cold or warm start automatically and electronically calculates the exact amount of fuel.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Winter setting slide control
It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)
Locking plug-in bolt
Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)
Large fuel tank
The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)
Air filter with long service life
The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)
Specification
Displacement
|
45.6 cm³
|
Power Output
|
2.2 kW / 3.0 HP
|
Weight
|
8.7 kg
|
Sound Pressure Level with Plastic Tool |
101 dB(A) |
Sound Pressure Level with Metal Tool |
101 dB(A) |
Vibration Level with Plastic Tool (Left) |
1.9 m/s² |
Vibration Level with Plastic Tool (Right) |
2.7 m/s² |
Vibration Level with Metal Tool (Left) |
2.4 m/s² |
Vibration Level with Metal Tool (Right) |
2.3 m/s² |
Total Length |
179 cm |
Cutting Tool |
AutoCut 46-2
|